Get certified for the Cisco CCNA certification exam with the CCNA Certification Study Guide, Volume 2 (200-301) course and lab. The CCNA course and lab cover the CCNA 200-301 exam objectives and provides an understanding of the topics such as access points, controllers (Cisco DNA Center and WLC), endpoints, servers, virtualization fundamentals, Cisco Wireless Architectures, and AP modes, and more.
Here’s what you will get
A candidate’s knowledge and skills required to install, configure, and manage a small to medium-sized network are validated by the Cisco CCNA certification. This certification gives a solid foundation in networking, security, and automation fundamentals. All support technicians involved in the installation, operation, and verification of Cisco networks should take the CCNA 200-301 exam.
Lessons
25+ Lessons | 118+ Exercises | 266+ Quizzes | 546+ Flashcards | 546+ Glossary of terms
TestPrep
49+ Pre Assessment Questions | 2+ Full Length Tests | 99+ Post Assessment Questions | 198+ Practice Test Questions
Hand on lab
33+ LiveLab | 34+ Video tutorials | 46+ Minutes
Lessons 1: Introduction
- Cisco’s Network Certifications
- What Does This Course Cover?
- CCNA Exam Overview
- CCNA Certification Exam 200-301 Objectives
Lessons 2: Network Fundamentals
- Network Components
- Next-Generation Firewalls and IPS
- Network Topology Architectures
- Physical Interfaces and Cables
- Ethernet Cabling
- Summary
- Exam Essentials
Lessons 3: TCP/IP
- Introducing TCP/IP
- TCP/IP and the DoD Model
- IP Addressing
- IPv4 Address Types
- Summary
- Exam Essentials
Lessons 4: Easy Subnetting
- Subnetting Basics
- Summary
- Exam Essentials
Lessons 5: Troubleshooting IP Addressing
- Cisco’s Way of Troubleshooting IP
- Summary
- Exam Essentials
Lessons 6: IP Routing
- Routing Basics
- The IP Routing Process
- Configuring IP Routing
- Configuring IP Routing in Our Network
- Dynamic Routing
- Routing Information Protocol (RIP)
- Summary
- Exam Essentials
Lessons 7: Open Shortest Path First (OSPF)
- Open Shortest Path First (OSPF) Basics
- Configuring OSPF
- OSPF and Loopback Interfaces
- Verifying OSPF Configuration
- Summary
- Exam Essentials
Lessons 8: Layer 2 Switching
- Switching Services
- Configuring Catalyst Switches
- Summary
- Exam Essentials
Lessons 9: VLANs and Inter-VLAN Routing
- VLAN Basics
- Identifying VLANs
- Routing Between VLANs
- Configuring VLANs
- Summary
- Exam Essentials
Lessons 10: Enhanced Switched Technologies
- Spanning Tree Protocol (STP)
- Types of Spanning-Tree Protocols
- Modifying and Verifying the Bridge ID
- Spanning-Tree Failure Consequences
- PortFast and BPDU Guard
- EtherChannel
- Summary
- Exam Essentials
Lessons 11: Access Lists
- Perimeter, Firewall, and Internal Routers
- Introduction to Access Lists
- Standard Access Lists
- Extended Access Lists
- Monitoring Access Lists
- Summary
- Exam Essentials
Lessons 12: Network Address Translation (NAT)
- When Do We Use NAT?
- Types of Network Address Translation
- NAT Names
- How NAT Works
- Testing and Troubleshooting NAT
- Summary
- Exam Essentials
Lessons 13: IP Services
- Exploring Connected Devices Using CDP and LLDP
- Network Time Protocol (NTP)
- SNMP
- Syslog
- Secure Shell (SSH)
- Summary
- Exam Essentials
Lessons 14: Security
- Network Security Threats
- Three Primary Network Attacks
- Network Attacks
- Security Program Elements
- Layer 2 Security Features
- Authentication Methods
- Managing User Accounts
- Security Password Policy Elements
- User-Authentication Methods
- Setting Passwords
- Summary
- Exam Essentials
Lessons 15: First Hop Redundancy Protocol (FHRP)
- Client Redundancy Issues
- Introducing First Hop Redundancy Protocol (FHRP)
- Hot Standby Router Protocol (HSRP)
- Summary
- Exam Essentials
Lessons 16: Virtual Private Networks (VPNs)
- Virtual Private Networks
- GRE Tunnels
- Summary
- Exam Essentials
Lessons 17: Quality of Service (QoS)
- Quality of Service
- Trust Boundary
- QoS Mechanisms
- Summary
- Exam Essentials
Lessons 18: Internet Protocol Version 6 (IPv6)
- Why Do We Need IPv6?
- The Benefits and Uses of IPv6
- IPv6 Addressing and Expressions
- How IPv6 Works in an Internetwork
- IPv6 Routing Protocols
- Configuring IPv6 on Our Internetwork
- Configuring Routing on Our Internetwork
- Summary
- Exam Essentials
Lessons 19: Troubleshooting IP, IPv6, and VLANs
- Endpoints
- Servers
- IP Config
- Troubleshooting IP Network Connectivity
- Troubleshooting IPv6 Network Connectivity
- Troubleshooting VLAN Connectivity
- Summary
- Exam Essentials
Lessons 20: Wireless Technologies
- Wireless Networks
- Basic Wireless Devices
- Wireless Principles
- Nonoverlapping Wi-Fi channels
- Radio Frequency (RF)
- Wireless Security
- Summary
- Exam Essentials
Lessons 21: Configuring Wireless Technologies
- WLAN Deployment Models
- Setting Up a Wireless LAN Controller (WLC)
- Joining Access Points (APs)
- Wireless LAN Controllers (WLC)
- WLC Port Types
- WLC Interface Types
- AP Modes
- AP and WLC Management Access Connections
- Summary
- Exam Essentials
Lessons 22: Virtualization, Automation, and Programmability
- Virtual Machine Fundamentals
- Virtualization Components
- Virtualization Features
- Virtualization Types
- Virtualization Solutions
- Automation Components
- Summary
- Exam Essentials
Lessons 23: SDN Controllers
- Traditional Network Monitoring Systems (NMS)
- Traditional Network Configuration Managers (NCMs)
- Traditional Networking
- Introduction to SDN
- Separating the Control Plane
- Controller-Based Architectures
- SDN Network Components
- DNA Center Overview
- Summary
- Exam Essentials
Lessons 24: Configuration Management
- Team Silos
- DevOps
- Infrastructure as Code (IaC)
- Ansible
- Ansible Tower/AWX
- Puppet
- Chef
- Summary
- Exam Essentials
Appendix A: Additional Content
Hands-on LAB Activities
TCP/IP
- Showing Cisco IOS File Systems Configuration on a Router
Easy Subnetting
- Configuring a CIDR-Based IP Network
Troubleshooting IP Addressing
- Viewing the IP Address, Mask, and Default Router Settings on Windows
- Viewing the IP Address, Mask, and Default Router Settings on Linux
IP Routing
- Using the show ip route Command
Open Shortest Path First (OSPF)
- Configuring OSPF
Layer 2 Switching
- Using the show Command
- Implementing Port Security
VLANs and Inter-VLAN Routing
- Configuring Interfaces as Trunk Ports
- Creating a New VLAN and Placing Switch Ports into that VLAN
Enhanced Switched Technologies
- Configuring Port Fast and Rapid Spanning Tree
Access Lists
- Creating and Applying an ACL at the CLI Using Named Access List Configuration
- Adding to and Displaying a Numbered ACL Configuration
Network Address Translation (NAT)
- Configuring Network Address Translation
IP Services
- Setting the Date, Time, Timezone, and Daylight Savings Time
- Seeing Severity 3 and 5 Messages at the Console and Severity 3 Only in the Buffer
- Configuring Syslog and Viewing Settings on a Router
- Disabling the Timestamp and Enabling a Sequence Number in Log Messages
Security
- Using dig for Passive Reconnaissance
- Using nslookup for Passive Reconnaissance
- Performing ARP Spoofing
- Spoofing MAC Address
- Configuring DHCP Snooping
- Encrypting IOS Passwords with the service password-encryption Command
- Encoding a Password as Type 5 (MD5)
First Hop Redundancy Protocol (FHRP)
- Configuring HSRP
Virtual Private Networks (VPNs)
- Configuring GRE Tunnels
Internet Protocol Version 6 (IPv6)
- Enabling IPv6 Routing and Routing Protocols
- Configuring Static Routing
Troubleshooting IP, IPv6, and VLANs
- Configuring VLANs
SDN Controllers
- Configuring SNMPv3
Configuration Management
- Creating and Running a Playbook
- Creating an ansible.cfg File
Reviews
There are no reviews yet.